-
Hardware Cloth Mesh Strainer
Our screens are made of galvanized 1/8" mesh cloth for suction screening and may be easily clamped to pipe. -
T-Line Strainers & Replacement Screens
These inline filters efficiently and effectively remove solids to prevent clogs in the line and damage to the pump or system. -
Stainless Steel Self-Cleaning Strainer
This self-cleaning suction screen is galvanized or epoxy coated and utilizes a heavy 10, 18 or 30 mesh stainless steel screen designed to increase pump efficiency. -
Basket Strainers
Basket Strainers can be used with all makes of centrifugal pumps. An “open” area of 50% allows Cadmium Plated Strainers to filter out large damaging debris, yet permits sufficient water passage to keep pumps functioning at full capacity. -
Munro PVC Basket Strainers
Designed to protect your pump system for the long haul in moderately dirty water, the Munro PVC Basket Strainers will keep grass clippings, algae, and other water-borne debris from clogging the pump and sprinkler system components. -
Munro Self-Cleaning PVC Basket Strainers
Pressurized spray nozzles are designed to combat the natural tendency of trash to collect around the exterior of a strainer while a pump is running. -
Basket Strainers – 1/8” holes
These basket strainers are comprised of 1/8’’ holes which efficiently strain water for most centrifugal lawn pumps. Constructed of high tensile stainless steel, these strainers are built to withstand harsh conditions. -
3" Munro Y-Strainer
These robust, uniquely constructed Y-strainers are most often used on larger pumps at the inlet & outlet. The Y-strainer cleans solids from the water to prevent damage to the pump or clogs in the line. -
2" Munro Deluxe Y-Strainer
The Munro Deluxe Y-Strainer offers all the features of the standard Y-Strainer, with the addition of an aluminum screen cover and a ball valve for quick flushing. -
2" Munro Y-Strainer
Easy removable cap for fast cleaning Corrosion-resistant buna rubber and polypropylene and glass-filled nylon components -
Submersible Well Pump Sleeves
Submersible motors are designed to operate with a cooling flow of water over the motor. If the pump installation does not provide the minimum flow, a flow inducer sleeve (flow sleeve) must be used. -
Submersible Well Pump Flow Sleeve & Stand
If the flow of water is coming from above the pump, then a flow sleeve must be added for motor cooling.